For the complete documentation index, see llms.txt. This page is also available as Markdown.

Quick Start

Create your first Disaster Recovery plan step by step

Disaster Recovery creates a plan that replicates a Servers or Remote Desktop subscription to another availability zone, ready to activate in the event of an incident.

You configure it with a three-step wizard: you choose the source (your Primary site), you choose the destination (your Recovery site) and define the replication parameters.

📘 What you get

A Disaster Recovery plan in My plans, with your source subscription as Primary site, a replica up and running and a Recovery site in the destination zone.

The initial replica takes time depending on the data volume.

Where Disaster Recovery lives

Disaster Recovery lives in its own subscription (DraaS), which you access from Cloud Services → Disaster Recovery. Inside you have four tabs:

  • Summary: the overview (plans, replicated servers, replicated GBs and drills) for the period you choose.

  • My plans: your plans, each with its Primary site, its replica and its Recovery site. Here you create new plans and launch failover.

  • Drills: the simulations to test the plan without touching production.

  • Events: the log of what is happening (completed replicas, errors), with filters by plan, date, subscription and user.

If you manage several environments, you can have multiple DraaS subscriptions and switch between them from the title selector.

The Summary tab gives you the overview: plans, servers and replicated GBs, and drills, for the period you choose.
Different Subscriptions Dropdown

Before you begin

You need:

  • Logged in to the Plenit platform.

  • A subscription to Servers or from Remote Desktop that you want to protect.

🚧 The source must be in a single zone

You can only protect a subscription whose resources are in a single availability zone.

If the subscription distributes resources across multiple zones, it will not appear in the source list.

🚧 No active snapshots at the source

If the subscription has an active snapshot, the wizard won't let you add it and will alert you in Step 1.

Delete the source snapshots before creating the plan.

Start setup

Depending on whether you already use Disaster Recovery or it's your first time, you reach the wizard through one of these paths. All three end up in the same place.

Situation
How you start

You already use Disaster Recovery

Enter Disaster Recovery and click New plan, at the top right of My plans

It's your first time with the service

On the product page, click I want to try it now

From a specific client

Go into Organization → Subscriptions and choose Disaster Recovery in "What do you want to register?"

If you already use Disaster Recovery, you open the wizard with New plan, at the top right of My plans.
The first time, you reach the same wizard from the product page, with Try it now.

Step 1. Choose the source and name the plan

In the wizard:

  1. Enter the Plan Name, which will help you identify it if you manage several.

  2. Select the subscription you want to protect. Each card shows what's inside (servers, disks, networks and IP; and in Remote Desktop, also users, licenses and applications), so you can choose wisely. The one you select is set as your Primary site.

  3. Proceed to the next step.

Step 1. Name the plan and choose the subscription to protect, which is set as your Primary site.

Step 2. Choose the destination

Select the destination availability zone, where your Recovery siteRecovery site is set. It can be in the same region as the source or in a different one: the further apart you keep the Primary site and Recovery site, the more you protect the environment from an incident that affects an entire region.

Step 2. Choose the destination zone where your Recovery site is set.

📘 SSH keys do not travel to the Recovery site

If you protect Linux machines, keep in mind that SSH keys remain available in the Primary site panel, but do not appear in the Recovery site panel when a Disaster Recovery evacuation is run.

Keep this in mind when planning how you will access the machines after a failover.

Step 3. Configure the replication parameters

You define how and how often the environment is replicated:

  1. Replication frequency: every 1, 3, 6, 12 or 24 hours.

  2. Start time: what time you want the replica to start.

  3. Restore points: how many states to keep, from 1 to 24. Each point is a moment you can go back to, so more points give you more room to choose which instant to recover to.

  4. Failover mode: how traffic is redirected to the Recovery site when you activate the backup.

Failover mode
Status

DNS

Available

IP

Coming soon

Save to create the plan.

Step 3. Define the frequency, start time, restore points and failover mode.

🚧 Old Windows servers: possible credential prompt

If you protect a Servers subscription with Windows machines deployed some time ago, the wizard may ask you for the administrator password.

It is used to update the agent and enable the operations required by the Disaster Recovery process. Enter it to continue.

When you save, we start replicating the resources to the Recovery site.

Check the plan in My plans

The plan appears in My plans. At first you will see it in state Configuring: the Recovery site shows its configuration process step by step (preparation of servers, creation and configuration of replica volumes and subscription synchronization). Each plan is organized into three blocks:

  • Primary site: your source subscription, active, with its zone.

  • Replica: the failover mode, the number of copies and the frequency you configured.

  • Recovery site: the destination environment that is being prepared in the other zone.

Just created, the plan appears as Configuring, with the Recovery site completing its setup in the other zone.

When the replica finishes being configured and restore points are available, the plan moves to Active and is already protecting the environment.

Then the block of Replica shows you the failover mode, the number of copies and the last and next replica, and the Recovery site enables the button Failover for the day you need to activate the backup.

Once Active, the plan protects the environment: the replica shows the last and next copy, and the Recovery site enables Failover.

You already have Disaster Recovery active

From here, from the Disaster Recovery subscription you can:

Last updated

Was this helpful?